A specific instrument for determining the surface temperature of different electrical equipment is the IEC 60335 surface temperature measurement probe. IEC 60335-2-9:2019 clause 11.3 Figure 105, IEC 60335-2-11 clause 11.3 Figure 101, and IEC60335-2-6-2002 clause 11.101 Figure 104 are just a few of the strict international standards that this probe complies with.
1. According to : IEC 62196-1 Figure 15 2. The test probe is used for household and similar electrical appliances of necessary protection of against electric shock test apparatus; Gauge for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection.
Test IEC60335-1 is specified for the Finger Nail Probe. used to verify that components that snap together are secure. The force required to operate the instrument can be adjusted using the spring gauge included into the handle. This probe has a handle made of insulating material and is made of stainless steel with a suitable hardened tip.
The IEC 61032 Figure 13 Test Probe 19 (5.6mm small finger probe) is built to simulate how children aged 36 months or younger might access hazardous parts in electrical or medical equipment.
Compliance is verified by inspection, the test of Clause 21.1, and the application of a force not exceeding 5 N using a 50mm circular stop face test finger that is similar to Test Probe B of IEC 61032, but replaces the non‑circular stop face with a circular stop face with a diameter of 50 mm.The test probe shall be applied to appliances equipped with adjustable mechanisms—such as belt tensioning devices—with these mechanisms adjusted to the most unfavorable position within their travel range. Belts shall be removed if necessary.
1. Standard:According to : GB4706、IEC335、IEC61032、IEC60065 2.It is used to the protective performance check of the apparatus structures and shells which is easy to access live parts
The vertical column type IPX12 rain test device is a professional waterproof testing equipment designed in full compliance with IEC 60529 standard. It is specially used to carry out IPX1 and IPX2 waterproof tests, supporting vertical dripping and 15° inclined dripping tests. With a stable column structure, it is easy to adjust the height and position, suitable for testing various electronic products, lamps, enclosures and components, and is widely used in laboratories and quality inspection rooms.
1. The thrust test refers directly to the point where the finger part cannot touch live parts or access hazardous parts, and bezels between 20mm and 50mm cannot be accessed. 2. In the experimental requirements to prevent proximity to hazardous components, the thrust test refers directly to the need to apply thrust.
Verify the protection of persons against access to hazardous parts, and verify the protection against access with a tool in accordance with IEC60335/IEC60529/IEC 60335.
IEC 61032 Figure 2 Test Probe B (Jointed Test Finger) is made to mimic the movement of a human finger in order to test access to potentially dangerous live elements in electrical and electronic equipment, such as industrial control panels and home appliances. Its dual-jointed design allows it to transverse gaps that rigid probes cannot reach by bending 90° (±10°) in the same plane and direction, simulating the flexibility of a finger.
IP1X test probe (per IEC 60529 / GB/T 4208) is a solid foreign object protection test tool for verifying IP1X dust/ingress protection grade.
