IEC Test Finger Probe
18 products
q2r8q0.jpg
IEC Test Finger Probe

50 mm Circular Stop Face IEC Test Finger Probe

Compliance is verified by inspection, the test of Clause 21.1, and the application of a force not exceeding 5 N using a 50mm circular stop face test finger that is similar to Test Probe B of IEC 61032, but replaces the non‑circular stop face with a circular stop face with a diameter of 50 mm.The test probe shall be applied to appliances equipped with adjustable mechanisms—such as belt tensioning devices—with these mechanisms adjusted to the most unfavorable position within their travel range. Belts shall be removed if necessary.

View product
5gx2kb.png
IEC Test Finger Probe

IEC61032 Test Finger Probe 11 Unjointed Test Finger

1. The thrust test refers directly to the point where the finger part cannot touch live parts or access hazardous parts, and bezels between 20mm and 50mm cannot be accessed. 2. In the experimental requirements to prevent proximity to hazardous components, the thrust test refers directly to the need to apply thrust.

View product
hcukor.png
IEC Test Finger Probe

IP3X IP4X Test Probe

Verify the protection of persons against access to hazardous parts, and verify the protection against access with a tool in accordance with IEC60335/IEC60529/IEC 60335.

View product
unnrq4.png
IEC Test Finger Probe

Test Probe B of IEC 61032

IEC 61032 Figure 2 Test Probe B (Jointed Test Finger) is made to mimic the movement of a human finger in order to test access to potentially dangerous live elements in electrical and electronic equipment, such as industrial control panels and home appliances. Its dual-jointed design allows it to transverse gaps that rigid probes cannot reach by bending 90° (±10°) in the same plane and direction, simulating the flexibility of a finger.

View product
dd56mw.jpg
IEC Test Finger Probe

IP1X Test Finger Probe

IP1X test probe (per IEC 60529 / GB/T 4208) is a solid foreign object protection test tool for verifying IP1X dust/ingress protection grade.

View product
Page 2 of 2